Call Today

 

 

What are your ideas on Hot Water Heater Repair?

Many contemporary houses use an electrical hot water heater for their furnace, because of its comfort and also convenience of use. Nonetheless, similar to any other electric home appliances, troubles might emerge with its usage, unexpectedly. It can be truly discouraging to get up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't warm adequate or perhaps also warm. Whatever the situation might be, water heater issues can be quite nerve-racking. The good news is, we have actually made a checklist of feasible options to your water heater problems. There are a number of factors that can create a number of these issues, it could be an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you switch off the main power supply for safety. Whatever the problem is, getting it fixed should not pose too much of an issue if you adhere to these actions:

 

Call A Specialist:

If after changing all malfunctioning components as well as resetting your temperature, the hot water heater still isn't working, you might need to contact a specialist plumber for a professional point of view. The problem with your heating system could be that the hot and cold faucets have been switched over or it may be undersized for the amount of warm water needed in your house. Whatever the case might be, a professional plumber would certainly help address the issue.

 

Examine Your Power Supply:

As fundamental as this might appear, it is very required. Without ample power, your hot water heater will not work. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the breaker tripped. If the breaker is the issue, simply transform it on and off again. Replace any kind of busted or worn-out fuse. Check the device with power after these changes to see if it's now functioning.

 

Examine Your Thermostat:

If your water heater still isn't working or the water appearing isn't warm sufficient, you may need to inspect the temperature level settings on your upper thermostat. Guarantee the breaker is turned off prior to doing anything. Open the accessibility panel and press the red switch for temperature reset over the thermostat. This must help heat up the water. Turn the breaker back on and examine if the problem has actually been resolved.

 

Inspect the Heating Element in the Hot Water Heater:

If it's not a power issue, then attempt having a look at your burner if it is still working. Test each of your burner to make sure the trouble isn't with any one of them. If any one of them is defective, replace that part and afterwards inspect whether the hot water is back on.

 

Verdict

Hot water heater troubles are not always major. Most of them are because of small problems like a blown fuse or worn-out heating element. Changing the damaged components ought to do the trick. Nonetheless, if you are still incapable to fix the problem, give a call to your nearest plumber ahead to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I have been very inquisitive about Hot Water Heater Repair and I hope you appreciated the entire post. Are you aware of somebody who is in to the niche? Be sure share it. We love reading our article about Hot Water Heater Repair.

Get A Quote